seems like its been a while

I'm terrible I know it. I need to update this more often but I don't. I'm doing this post just as a catch up post. I got into turning and it certainly took off. I became addicted to it right away. I have a 1950 Shopsmith Model 10ER which is a wonderful machine. I bought a jaw chuck and things have been easier since. I found a good deal on Teknatools website for a refurbished Teknatool G3. Picked up another set of jaws for smaller work but the chuck came with a 50mm set from the start. I mainly only use the lathe function. I also purchased a pen mandrel which Penn State Industries sells. I can mostly do everything on it.

1950 Shopsmith 10ER with pen Mandrel 

Shopsmith with Teknatool G3 scroll chuck.

First Bowl with my shopsmith since adding chuck. 

I have done some flatwork since getting the lathe. I made a bookstand in the William and Mary style for my moms birthday. The bookstand is mostly hand tool work. I cut the pieces to size on my tablesaw and lathe to turn the feet. Everything else is hand tool work. Fun project and I want to give credit to Chuck Bender for the design, work up on his blog, and magazine article.  His work on this inspired me to make one. Piece is made in walnut and has an oil and wax finish.

William and Mary Bookstand in walnut with BLO and wax finish

Also other work I have done lately;

Banana Holder for my Dad's Birthday

Chistmas Orniments I turned.

Plane till

Finished my plane till

Finished another project

A project that has been in the making for about 6 years or so. I told my wife I will build you a jewelry cabinet. It got to be a joke around the family since it had not even been started until about last year. I toiled over the design several times and even restarted it last year after i started it. Once I finally settled on a design that I found pleasing I started building again. I tried to give it a Krenov feel though not sure how successful I was at that. I started off using oak for the majority of the cabinet. Then made up a cedar drawer to fit in the place where I decided it would go. I had some maple I found in my pile to use for the doors. I went back to Oak for the legs and base that would be screwed to the bottom. I finally made a tapered leg project on this one. I got a lathe in the last year just so I could turn spindles or shaker style knobs. The lathe I got to use by turning a couple of shaker style knobs for pulls on this cabinet as well. This has two sets of hook racks for handing necklaces or earrings. I used an oil and wax finish which is by far one of my favorite finishes. Oil and wax yields great results and is a perfect low VOC finish for small shops like mine. It starts with BLO ( boiled linseed oil ) applying till it is no longer needed. Then sand down with 0000 steel wool and rub on wax let film and buff out.